LM20E 20孔道常规分析雾化吸烟机
发布时间：2019-05-17
LM20E – the analytical routine module with 20 channels
The LM20E is designed to cover higher sample amounts for the routine testing of e-cigarettes, vaporizers and heated tobacco products. It offers the operator 20 individual vaping ports on its swiveling puffing bar which allows vaping in different angles to the horizontal position.
In blocks of 4 ports each the sample ports are connected to 5 high performance piston pumps PM1, which are controlled by a touchscreen user interface. The complete sequence of the vaping process is coordinated by the control unit according to the master/slave principle. The operator is guided through the self-explanatory software and informed about LM20E current status as comprehensively as possible. By Ethernet interface LM20E can be linked to central computer systems for transfer of vaping plans and result tables. The ports are as well connectable to the most common trapping systems like Cambridge Filter Pads, Liquid traps (Impingers) or electrostatic precipitation. Optionally it can be equipped with aerosol detection units to control aerosol flow. Other features and options are the integrated free adjustable sample activation units and the sample holders keeping every test specimen in the ideal position. It is all fitted in an ergonomic portable rack which offers the direct placement of the chosen trapping systems.
LM20E设计用于大量样品的日常检测分析，主要用于电子烟、雾化器和加热烟草制品的常规检测。20个相互独立的雾化吸烟通道供操作人员使用，吸烟孔道所在的吸烟横梁可允许操作人员上下旋转调整水平角度来满足各种角度的吸烟要求。
所有吸烟通道成组分别连接至5个高性能抽吸活塞泵PM1，其中每4个孔道为一组连接到一个PM1上面，PM1由各自的触摸屏操作界面进行控制。各控制器之间采用主/从控制原理进行协调控制，实现整个雾化吸烟进程的控制。操作人员由自解释操作软件界面引导进行操作控制，软件界面能够全面地告知操作员LM20E的当前所有状态。LM20E可通过以太网接口连接到中央计算机系统以传输雾化吸烟方案和吸烟结果等数据。该雾化吸烟机的每个吸烟通道均可与大部分常见的捕集系统相连，如：剑桥滤片捕集器、溶液捕集器（容剂瓶）、静电捕集器等。此外，每个通道均可选配烟雾探测器以监控烟雾气流。其他功能和选配件还包括可自由调节的集成化样品激活装置、能将每种样品固定在最佳位置的样品夹持器等。这些模块安装在一个便携式人体工学机架上，同时也可直接在该机架上安装选配的捕集系统。
In blocks of 4 ports each the sample ports are connected to 5 high performance piston pumps PM1, which are controlled by a touchscreen user interface. The complete sequence of the vaping process is coordinated by the control unit according to the master/slave principle. The operator is guided through the self-explanatory software and informed about LM20E current status as comprehensively as possible. By Ethernet interface LM20E can be linked to central computer systems for transfer of vaping plans and result tables. The ports are as well connectable to the most common trapping systems like Cambridge Filter Pads, Liquid traps (Impingers) or electrostatic precipitation. Optionally it can be equipped with aerosol detection units to control aerosol flow. Other features and options are the integrated free adjustable sample activation units and the sample holders keeping every test specimen in the ideal position. It is all fitted in an ergonomic portable rack which offers the direct placement of the chosen trapping systems.
LM20E设计用于大量样品的日常检测分析，主要用于电子烟、雾化器和加热烟草制品的常规检测。20个相互独立的雾化吸烟通道供操作人员使用，吸烟孔道所在的吸烟横梁可允许操作人员上下旋转调整水平角度来满足各种角度的吸烟要求。
所有吸烟通道成组分别连接至5个高性能抽吸活塞泵PM1，其中每4个孔道为一组连接到一个PM1上面，PM1由各自的触摸屏操作界面进行控制。各控制器之间采用主/从控制原理进行协调控制，实现整个雾化吸烟进程的控制。操作人员由自解释操作软件界面引导进行操作控制，软件界面能够全面地告知操作员LM20E的当前所有状态。LM20E可通过以太网接口连接到中央计算机系统以传输雾化吸烟方案和吸烟结果等数据。该雾化吸烟机的每个吸烟通道均可与大部分常见的捕集系统相连，如：剑桥滤片捕集器、溶液捕集器（容剂瓶）、静电捕集器等。此外，每个通道均可选配烟雾探测器以监控烟雾气流。其他功能和选配件还包括可自由调节的集成化样品激活装置、能将每种样品固定在最佳位置的样品夹持器等。这些模块安装在一个便携式人体工学机架上，同时也可直接在该机架上安装选配的捕集系统。
